Abcite® coating

contact us

Anti-corrosion coating by Duracoat

What is Abcite® coating?

When standard corrosion protection is no longer enough, there is Abcite®. Abcite® coating is the ultimate protection against any deterioration. This thermoplastic coating pushes all the boundaries of traditional corrosion prevention.

A single coat of Abcite® coating is enough to exceed the most stringent corrosion standards. This immediately explains the notable interest from the water treatment, maritime and offshore sectors.

Benefits of Abcite® coating

  • No primer required.
  • Contains no solvents, bisphenols, halogens, PVC, phthalates or hardeners.
  • Permanently impermeable (even with permanent immersion) and minimal friction (smooth water passage in coated pipelines).
  • For Abcite 1060 and X60 drinking water contact is permitted.
  • Highly abrasion and impact resistant, good electrical insulating properties, UV and chemical resistant.
  • Good adhesion and edge coverage without primer.
  • Already after a single working pass, with layer thicknesses from 400 microns, the highest standard for resistance to corrosion, salt spray and UV is achieved (category C5-M and IM3, according to
    ISO 123944-6
    ISO 20340
  • Once cooled, the coated object is immediately ready for use after the application process.
  • Finish available in different colors.

Applications of Abcite® coating

Because of its exceptional corrosion prevention, Abcite® coatings are particularly suitable for marine, drinking water facilities and offshore use. There are, of course, countless other applications where the technical advantages add interesting value:

  • Maritime sector: rudder blades, ship components, offshore and port equipment, fittings, underwater structures, piping, …
  • Water supply: water pipes, water treatment plants, fire extinguishing systems, …
  • Street furniture: light poles, signal poles, fencing, railings, benches, …

Fancy working together?

Still looking for a partner specializing in Abcite® coatings? We will gladly explain our knowledge and tailored advice in a no-obligation, personal conversation. In doing so, tell us about your coating challenges and we will be happy to think with you!

Have a question about Abcite® coating? contact us

Other services


To protect metal surfaces, we apply plastic coatings such as Abcite®, Rilsan® and Resicoat®. We do this with various plastification techniques such as vertebral sintering or hot spraying.

Fluorinated coatings

Duracoat has a wide range of options in surface treatment techniques and therefore also in printing. As a final finish, we can also print or print on your coated products or painted parts. V coat provides a total solution through various in-house printing techniques.

Powder coating

Powder coatings are environmentally friendly and stand for scratch-resistant results. Powder coating applies to all kinds of ferrous metals. V coat does it all with a structural focus on quality.


The quality of powder or wet-lacquer coating stands or falls with proper and thorough pre-treatment of the materials. Only then will you get an even, scratch-resistant and beautiful end result.

Additional Services

Duracoat also offers the solution for additional services. One of the sister companies within the group, V coat, specializes in printing, assembly and EMI shielding.

This site is registered on as a development site. Switch to a production site key to remove this banner.